Jib Cranes

Type:

CL1
The slewing jib crane type CL1 is a column mounted crane designed for solving small problems of manipulation of load in workshops, this crane is particularly easy to operate and very easy running. The range of supply comprises the following features: Lifting capacity from 250 kg. Up to 1.000 kg, slewing range 270º, and with a maximum length of the arm up to 5.000 mm, the turning of the arm and the movement of the chain hoist are always manual.

ML1
The slewing jib crane type ML1 is a wall mounted crane designed for solving small problems of manipulation of loads in workshops. The range of supply comprises the following features: Lifting capacity from 250 kg up to 1.000 kg. Slewing range 180º and with a maximum length of the arm up 5.000 mm, the turning of the arm and the movement of the chain hoist are always manual.

CRX
The slewing jib crane type CRX is a column mounted crane specially designed to reduce height loss and to install a chain hoist with an electric powered trolley, The range of supply comprises the following features: Lifting capacity form 250 kg up to 3.200 kg, slewing range up to 270º and with a maximum length of the arm up to 7.000 mm, the turning of the arm and the movement of the hoist are always manual, optional electric trolley.

MRX
The slewing jib crane type MRX is a jib wall mounted crane specially designed to reduce height loss and to install a chain hoist with electric powered trolley. The range of supply comprises the following features: Lifting capacity from 250 kg up to 3.200 kgs, slewing range up to 180º and with a maximum length of the arm up to 7.000 mm, the turning of the arm and the movement of the hoist are always manual, optional electric trolley.

CR1
The slewing jib crane type CR1 is a reinforced column mounted crane specially designed for heavy jobs of manipulation of loads. The range of supply comprises the following features: Lifting capacity from 250 kg up to 10.000 kg, slewing range up to 360º and with a maximum length of the arm up to 10.000 mm, optionally the slewing of the arm and the trolley of the hoist could be made electrically.

MRC
The jib crane type MRC is a wall mounted crane specially designed for running along the workshop and for solving heavy jobs of manipulations of loads, This crane is also used when conventional lifting systems’ are not possible. The range of supply comprises the following features: Lifting capacity from 1.000 kg up to 5.000 mm and with a maximum length of the arm up to 7.000mm. All movements are3 electrically powered.

Common main characteristics

  • Lifting and lowering end limit switch.
  • Two speeds in all movements, slow for safe placement, and fast for normal use.
    Lifting speeds ratio 4:1 / 6:1
    Trolley speeds ratio 3:1 / 4:1 (with electric trolley).
  • Overload limit device by means of an slipping clutch.
  • Standard voltage 380 V,50 Hz and 440 V,60 Hz
  • Low control voltage 42 V.
  • Gir manual i elèctric de 180º, 270º y 360º
  • Designed and builded according to the rules DIN-15018 H2, B2, B3. DIN-15019,DIN-1045.
  • Main disconnecting switch.